Base

OEM PowerEdge R6525 Server

Chassis

3.5" Chassis with up to 4 Hot Plug Hard Drives

Motherboard

PowerEdge R6525 Motherboard

Processor

AMD 7313 3.0GHz,16C/32T (1)

Memory

64 GB 3200MT/s, Dual Rank (4x16)

RAID/Internal Storage Controllers

PERC H745 Controller, Front

Hard Drive

BOSS-S2 controller card + with 2 M.2 240GB (RAID 1)

8TB 7.2K RPM SAS ISE 12Gbps 512e 3.5in Hard Drive (4)

Network Adapters

2 x 1Gb Onboard LOM

Broadcom 57416 Dual Port 10GbE BASE-T Adapter, OCP NIC 3.0

Fans

Standard Fan x6

Power Supply

Dual, Hot Plug, Redundant Power Supply (1+1), 800W

Power Cords

C13 to C14, PDU Style, 12 AMP, 6.5 Feet (2m) Power Cord, North America

PCIe Riser

Riser Config 1, 1 x 16 FH

Embedded Systems Management

iDRAC9, Enterprise

Quick Sync

None

Rack Rails

ReadyRails Sliding Rails Without Cable Management Arm

PSU Specifications:

 PSU

 Class

 Heat Dissipation (Maximum)

 Frequency

 Voltage

 Current

 

8OO W Mixed Mode

Platinum

3000 BTU/hr

50/60 Hz

100–240 V AC, autoranging

9.2 - 4.7 A

Temperature Specifications A2:

 Allowable continuous operations

 

 Temperature ranges for altitudes <= 900 m (<= 2953 ft)

10–35°C (50–95°F) with no direct sunlight on the equipment

 Humidity percent ranges (non-condensing at all times)

8% RH with -12°C minimum dew point to 80% RH with 21°C (69.8°F) maximum dew point

 Operational altitude de-rating

Maximum temperature is reduced by 1°C/300 m (1.8°F/984 Ft) above 900 m (2953 Ft)

Temperature Specifications A3:

 Allowable continuous operations

 

 Temperature ranges for altitudes <= 900 m (<= 2953 ft)

5–40°C (41–104°F) with no direct sunlight on the equipment

 Humidity percent range (non-condensing at all times)

8% RH with -12°C minimum dew point to 85% RH with 24°C (75.2°F) maximum dew point

 Operational altitude de-rating

Maximum temperature is reduced by 1°C/175 m (1.8°F/574 Ft) above 900 m (2953 Ft)

Temperature Specifications A4:

 Allowable continuous operations

 

 Temperature range for altitudes <= 900 m (<= 2953 ft)

5–45°C (41–113°F) with no direct sunlight on the equipment

 Humidity percent range (non-condensing at all times)

8% RH with -12°C minimum dew point to 90% RH with 24°C (75.2°F) maximum dew point

 Operational altitude de-rating

Maximum temperature is reduced by 1°C/125 m (1.8°F/410 Ft) above 900 m (2953 Ft)

Temperature Specifications Shared Requirements Across All Categore:

 

 Allowable continuous operations

 

 Maximum temperature gradient (applies to both operation and non-operation)

20°C in an hour* (36°F in an hour) and 5°C in 15 minutes (9°F in 15 minutes), 5°C in an hour* (9°F in an hour) for tape hardware

NOTE * - Per ASHRAE thermal guidelines for tape hardware, these are not instantaneous rates of temperature change.

 Non-operational temperature limits

-40 to 65°C (-40 to 149°F)

 Non-operational humidity limits

5% to 95% RH with 27°C (80.6°F) maximum dew point

 Maximum non-operational altitude

12,000 meters (39,370 feet)

 Maximum operational altitude

3,048 meters (10,000 feet)

Maximum Vibration Specifications:

 

 Operating

0.21 Grms at 5 Hz to 500 Hz (all operation orientations)

 Storage

1.88 Grms at 10 Hz to 500 Hz for 15 minutes (all six sides tested)

Maximum Shock Pulse Specifications:

 

 Operating

Six consecutively executed shock pulses in the positive and negative x, y, and z axis of 6 G for up to 11 ms.

 Storage

Six consecutively executed shock pulses in the positive and negative x, y, and z axis (one pulse on each side of the system) of 71 G for up to 2 ms.